Post by Tracy on Feb 16, 2010 3:18:38 GMT -5
Note: V'Ger was not originally mine, in fact it was made by one 'Parassyte' (Or Spatula, I guess, depending on what forum got you to this forum), then was given to Kody, and then given to me to use in ARC, as I only had 3 bots with renders at that point.
This means that I have copy-pasted the original stats that the original owner posted on FRA, with minor editing placed in italics, and I'm not altogether sure which version they are for..
V'Ger stats:
mass:
Stainless Steel Frame - 20.43866 (1 cm thick predominantly, 2cm on the underbelly and parts of the lifting fork.)
Titanium Armor - 26.14416 (top - .764 cm, bottom - .508 cm)
Wheels - included in the Ti Armor estimate, .635 cm thick, solid, rubber treads
S28-400 magmotors x 2 - 6.182
S28-300 magmotor - 2.500
Flywheel - ~10.000 kg, mostly in the teeth.
Maxtor controller - ~1.000 kg
EV Warrior - 1.472 kg
Husqvarna 3120XP - 10.409
NiMh 24v Battlepacks x 3 - 3.6
TOTAL - 81.746 KG
Weapon - Circular flywheel, 8.4 hp (6.2 kW), spins at 1:2 reduction for 5000 rpm. Lifter is capible of lifting ~100 kg bot.
Frame - Stainless 400 Steel
Armor - Titanium (thickness on the mass chart)
Srimech - Lifting plate can self-right the robot in any position in 1-2 flips. NOT INVERTIBLE.
Wheels - 15 mph, like 90% of the other robots you'll ever see. 2 S24 mags power it at 24 volts. 60-amp continuous cell discharge, which is pretty good for single packs weighing only 1.2 kg each.
Clearance - HUGE. 6.985 cm mostly, although the wheels and the rear wedge make full contact with the ground obviously.
Strengths -
--Internal Combustion Engine has an EV Warrior starter motor, in case it stalls during a fight.
--Powerful flywheel with adjustible height. Rides at 5.04 cm when level, minimum height - 3.81 cm, maximum height - 6.34, doesn't matter too much though.
--Lifter can LIFT any ~100 kg robot, and can flip some opponents, depending on the angle I get, and the distribution of their weight.
--There's enough extra weight (>15 kg worth) for (1) a "robot trap" that lengthens the rear lifter significantly (2) ablative 2024 ali armor (which either covers the wheels or the robot's top), or (3), replacing the flywheel, a stainless steel scoop for the front, which I'll likely never need.
Weaknesses -
--Not a good pushybot.
--Certain spinner designs will probably be able to stop it no matter what (I'm thinking cage spinners on this one).
--Top Heavy to a large extent, though it's wide enough and distributed enough to not affect turning or driving, it'll usually land upside-down if flipped.
This means that I have copy-pasted the original stats that the original owner posted on FRA, with minor editing placed in italics, and I'm not altogether sure which version they are for..
V'Ger stats:
mass:
Stainless Steel Frame - 20.43866 (1 cm thick predominantly, 2cm on the underbelly and parts of the lifting fork.)
Titanium Armor - 26.14416 (top - .764 cm, bottom - .508 cm)
Wheels - included in the Ti Armor estimate, .635 cm thick, solid, rubber treads
S28-400 magmotors x 2 - 6.182
S28-300 magmotor - 2.500
Flywheel - ~10.000 kg, mostly in the teeth.
Maxtor controller - ~1.000 kg
EV Warrior - 1.472 kg
Husqvarna 3120XP - 10.409
NiMh 24v Battlepacks x 3 - 3.6
TOTAL - 81.746 KG
Weapon - Circular flywheel, 8.4 hp (6.2 kW), spins at 1:2 reduction for 5000 rpm. Lifter is capible of lifting ~100 kg bot.
Frame - Stainless 400 Steel
Armor - Titanium (thickness on the mass chart)
Srimech - Lifting plate can self-right the robot in any position in 1-2 flips. NOT INVERTIBLE.
Wheels - 15 mph, like 90% of the other robots you'll ever see. 2 S24 mags power it at 24 volts. 60-amp continuous cell discharge, which is pretty good for single packs weighing only 1.2 kg each.
Clearance - HUGE. 6.985 cm mostly, although the wheels and the rear wedge make full contact with the ground obviously.
Strengths -
--Internal Combustion Engine has an EV Warrior starter motor, in case it stalls during a fight.
--Powerful flywheel with adjustible height. Rides at 5.04 cm when level, minimum height - 3.81 cm, maximum height - 6.34, doesn't matter too much though.
--Lifter can LIFT any ~100 kg robot, and can flip some opponents, depending on the angle I get, and the distribution of their weight.
--There's enough extra weight (>15 kg worth) for (1) a "robot trap" that lengthens the rear lifter significantly (2) ablative 2024 ali armor (which either covers the wheels or the robot's top), or (3), replacing the flywheel, a stainless steel scoop for the front, which I'll likely never need.
Weaknesses -
--Not a good pushybot.
--Certain spinner designs will probably be able to stop it no matter what (I'm thinking cage spinners on this one).
--Top Heavy to a large extent, though it's wide enough and distributed enough to not affect turning or driving, it'll usually land upside-down if flipped.