|
Scarab
Feb 17, 2009 13:43:23 GMT -5
Post by Kody on Feb 17, 2009 13:43:23 GMT -5
AztecShape: Box on wheels with pushed-in top. Colour: Golden, red jaws. Weight: 25kg Drive: Uses two S28-150 Magmotors @ 24v. Power: 4 NiCad Battlepacks @ 24v. Motivation: 4 Gamma Raptor-like wheels. Speed: 7mph Armour: 20mm high-density polyethylene (HDPE). Side and rear skirts are 3mm Grade 5 titanium. Ground Clearance: 0mm at front, and 2mm at the sides and rear without skirts. With skirts its 0mm all around. Dimensions in CM (LxWxH): 35 x 45 x 12 Weapons: It has a linear actuated clamping device not unlike that of Complete Control, with two clamping plates like the ones seen on my previous heavyweight, Cortez. The problem is that, like Cortez, they don't really do damage; their main objective is to carry an opponent to a hazard, or ram repeatedly against a wall until something breaks. The plates are made of 7mm titanium/vanadium alloy and are hard to break. Srimech: Lifting plate Strengths: Good weapon, hard to get under. Weaknesses: Doesn't really damage the opponent, slow srimech BIO: It seems to be a filler vapourbot, as it hasn't fought yet, but a minor freshening is pretty much all it needs...pity it got a major one. XD Battle Record = N/A Time of Activity = January 2007 - December 2008 Notable Achievements = None
|
|
|
Scarab
Feb 17, 2009 13:43:38 GMT -5
Post by Kody on Feb 17, 2009 13:43:38 GMT -5
ScarabShape: The render explains. XD Colour: The render explains that too. XD Weight: 27kg Drive: 2 TWR18 Team Whyachi motors, at 23.1 volts. Power: 7 M1 A123 Lithium-Ion packs Motivation: 2WD; has rather tough 7075 aluminium alloy hubs with go-kart tyres around them. Speed: 12mph Armour: 3mm Grade 5 titanium, pretty much the entire main body. The rear wedge is sharpened 5mm Ti/V alloy. Ground Clearance: Underneath the lowest point the beater can go, is 10mm. The sides and are also 10mm and the rear wedge is of course 0mm. Turning Circle: Spins on the spot, so 0. Dimensions in CM (LxWxH): 40 x 30 x 10 Weaponry: The main weapon is the 'egg-beater' weapon at the front, the beater itself made of 3.2mm Hardox 400. The inner axle that it spins around is a 4mm Grade 5 titanium tube. The beater's powered by a S28-400 MagMotor at 23.1 volts and 7 more Li-Ion packs. Should give out somewhere in the region of 25-35kJ, I calculated for a drum equivalent (36kJ) but compensated for the slimmer beater design. There are some spikes in front to spear opponents should the beater fail, and added to this is the hinged wedge at the rear which I can use to ram opponents. Srimech: Invertible. Notes: Quite compact to make it in the weight limit. BIO: Damn, what a bunch of work I did on this one! Hope it pays off...minor refreshening to hell, I redesigned Aztec completely. XD Battle Record = N/A Time of Activity = January 2009 - present Notable Achievements = None
|
|