|
Post by Kody on Feb 20, 2010 12:04:21 GMT -5
If I have an issue with some vapourbots, I will let you know here.
|
|
|
Post by Kody on Feb 20, 2010 12:06:33 GMT -5
First up, Lian Walsh.
----
Hammer & Nails 2 - BIIBI
1) Armox is more dense than Hardox...you'll never be able to get it onto your robot. I would suggest Titanium/Vanadium alloy.
2) The picture gives off some errors. According to it, your axe shaft will hit the wedge and get in the way of your shot. Also, you look like you'll get stranded on your sides, and it doesn't really display the chassis surrounding the robot.
3) B42-500 MagMotors are actually BFA42-500 MagMotors and they put out far, FAR less than 60hp. I'd suggest more common motors.
4) 5mm is too low of a ground clearance to move properly.
----
|
|
|
Post by Kody on Feb 22, 2010 14:06:41 GMT -5
The above robot(s) have been removed from BIIBI.
|
|
|
Post by Kody on Mar 1, 2010 16:41:34 GMT -5
The Servant's Assistant - BIIBI
1) With those dimensions, you're not going to get 6mm titanium over it with making it overweight. I would suggest making the height and length quite a bit smaller.
2) It can probably get stacked on its sides.
3) ARC stats can only total 22 points. You have 23 points in there.
|
|
|
Post by Kody on Mar 2, 2010 16:39:26 GMT -5
The above robot has been removed from BIIBI, good work Lian.
|
|
|
Post by Kody on Mar 4, 2010 16:06:28 GMT -5
Whoops, forgot to notice the two vapourbots behind The Servant's Assistant. I won't add the BIIBI mark to them right now, but just for some pointers... Druid 2.01) Using a real robot as a shape isn't a good idea. Some people may have never seen of heard of Reptirron the 2nd. Please try to describe the shape rather than referencing a real robot that's possibly unheard of, and it possibly may not go by the dimensions you put there anyway. 2) 3mm Hardox is questionable since 3.2mm Hardox 400 is the thinnest thickness you can get in standard, but it is possible to shave it down a bit... 3) Your bot has 24 stat points for ARC, lol...otherwise it looks fine. Merry Hampton Evo1) 24mph is a bit optimistic, and you will find it hard to control. You might want to lower it to 20mph or lower. 2) Again with the 3mm Hardox but again it's possible to shave it down so I'll shut up. 3) I'd switch the 6.5 titanium with 5mm Titanium/10% vanadium alloy so it doesn't appear to be overweight, but that's just a minor suggestion. Otherwise, it looks fine.
|
|